Visit Our Lennox Parts Store

Service Forum for Lennox HVAC Owners and Servicers.

All Forums

Repairing and Servicing Lennox Products

Repairing / Service Lennox Air Cleaners

EAC-1400

New Topic

Reply to Topic

Printer Friendly

Author

Topic

4Howards

2 Posts

Posted - 10/22/2007 : 4:55:07 PM

The model number shown on my air cleaner is HC-EAC-1400 with a date code of 0001. It appears the air flow switch is not working. Is the 80K61 compatible with this unit.

Cozy.Support

5945 Posts

Posted - 10/23/2007 : 07:44:15 AM

You can use the link in the signature line of my response to contact the CozyParts.com, Inc parts counter. They can look up the correct part number for you.

Cozy.Support does not provide a diagnosis for users of this forum. We do, however, try to provide information that will help servicers arrive at their own diagnosis.

Once you know what part you need, you can contact the Cozy parts department by using the link below
http://www.cozyparts.com/Lennox-Parts/locator_form.aspx

4Howards

2 Posts

Posted - 10/28/2007 : 10:20:02 AM

Replaced the air flow switch. The LED lights up when the blower is on. However, the "normal" arcing that occurs when the EAC first activates has not been heard. I know there is power coming from the HV unit. The cells look OK. Is it possible that the HV unit is not putting out enough volts? Is there any way to test this? Is there any way to test the cells?

Cozy.Support

5945 Posts

Posted - 10/28/2007 : 11:50:38 AM

If the light is on, the high voltage unit should be working. There is not an easy way to check the high voltage unit without using a high voltage meter (its around 6K volts). Probably would be easiest to just let it run a few weeks and see if dust is collecting on the cells.

Topic

New Topic

Reply to Topic

Printer Friendly

Jump To:

Lennox HVAC Owners and Servicers Community Forum

This page was generated in 0.09 seconds.

Snitz Forums 2000

Service Forum for Lennox HVAC Owners and Servicers.

Please Choose Your Destination